Bluetooth connection, Details, Help guide – Sony MDR-10RBT User Manual
Page 71
MDR-10RBT
>
>
BLUETOOTH connection
Pairing cannot be done.
Bring the headset and the BLUETOOTH device closer together.
Cannot make a BLUETOOTH connection.
Check that the headset is turned on.
Check that the BLUETOOTH device is turned on and the
BLUETOOTH function is on.
Connection with the BLUETOOTH device may not be memorized
on the headset. Make a BLUETOOTH connection from the
BLUETOOTH device to the headset soon after pairing is
complete.
The headset or the BLUETOOTH device is in sleep mode.
The BLUETOOTH connection is terminated. Make the
BLUETOOTH connection again.
Distorted sound
Make sure that the headset is not receiving interference from a
wireless LAN, other 2.4 GHz wireless device, or microwave oven.
The correspondence distance is short. (Sound skips.)
If a device that generates electromagnetic radiation, such as a
wireless LAN, other BLUETOOTH device(s), or a microwave
oven is nearby, move the headset away from such sources.
Point the antenna of the headset towards the BLUETOOTH
device. Make sure no obstacles blocks the communication.
The headset does not operate properly.
Reset the headset. Pairing information is not deleted by this
operation.
Insert a small pin, etc., into the hole, and push it until you feel a
click.
71
SEARCH