Sony DCR-IP210 - Manual (Page 119)

119
“Memory Stick” Operations
Using NightFraming
The NightFraming enables you to check a subject even at night and then record with
natural colors using the flash.
(1) Set the POWER switch to MEMORY.
(2) Set NIGHTSHOT/NIGHTFRAMING to NIGHTFRAMING.
The and NIGHTFRAMING indicators flash, then and indicators
light up on the LCD screen.
(3) Press PHOTO lightly.
The auxiliary light (HOLOGRAM AF) (p. 117) emits to adjust the focus
automatically.
(4) Press PHOTO deeper.
The flash fires, then recording starts.
To cancel NightFraming, set NIGHTSHOT/NIGHTFRAMING to the center
position (green z position).
While using NightFraming, you cannot use the following functions:
– White balance
– PROGRAM AE
– Exposure
– Flexible Spot Meter
– Spot Focus
– Continuous photo recording
While using NightFraming:
– Even if FOCUS is set to MANUAL, focus is automatically adjusted.
– Even if HOLOGRAM F is set to OFF in the menu settings, the auxiliary light emits
light.
– Even if you set No flash, the flash fires.
– You see the subject in incorrect colors, but the recorded picture is in natural colors.
Recording still images on a “Memory Stick”
– Memory photo recording
SUPER NS
COLOR SLOW S
NIGHTSHOT
NIGHTFRAMING