Sony DCR-IP210 - Manual (Page 175)

175
Using the Network function
– DCR-IP220 only
You can access the Internet using a Bluetooth equipped device that is complied to your
camcorder. Once the access is made, you can view a Web page, send/receive your
e-mail, etc. This section describes only how to open the Network Menu.
(1) Set the POWER switch to MEMORY/NETWORK.
(2) Press NETWORK.
Network Menu appears.
For the details, refer to the Network Function Operating Instructions supplied with
your camcorder.
On trademarks
•The Bluetooth trademarks are owned by their proprietor and used by Sony
Corporation under license.
•All other product names mentioned herein may be the trademarks or registered
trademarks of their respective companies. Furthermore, “TM” and “®” are not
mentioned in each case in this manual.
About (Bluetooth) lamp
The blue lamp lights up when your camcorder is exchanging data with a device which
has Bluetooth function.
Notes
•Make sure that your camcorder is in the standby mode with the POWER switch set to
MEMORY/NETWORK.
•Do not remove the power source while operating the network functions or your
NETWORK mode settings may be erased. Also, close NETWORK mode before you
turn the POWER switch to (CHG) OFF or change the mode.
— Using the Network function —
Accessing the network
1
MEMOR
Y/NETW
ORK
CAMERA
POWER
(CHG)
OFF
ON
MODE
VCR
(Bluetooth) lamp
NETWORK