Sony DCR-IP210 - Manual (Page 128)

128
Superimposing a still image in a “Memory Stick” on an image
– MEMORY MIX
Recording a superimposed image to a “Memory Stick” as a still
image
Before operation
Insert a recorded “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY.
(2) Press FN and go to PAGE2.
(3) Press MEM MIX. The image recorded on the “Memory Stick” appears on the
right corner of the LCD screen.
(4) Press –/+ on the right lower corner of the LCD screen to select the still image
which you want to superimpose.
– : To see the previous image
+ : To see the next image
(5) Press a desired mode. The still image is superimposed on the moving picture.
(6) Press –/+ on the left lower corner of the LCD screen to adjust the effect, then
press OK. The display returns to PAGE2.
M. CHROM: Blue chroma key (blue background) to extract a still image and
superimpose it on a moving picture
M. LUMI: Brightness level used when extracting a still image and
superimposing it on a moving picture
C. CHROM: Blue chroma key (blue background) to extract a moving picture
and superimpose it on a still image
The fewer bars there are on the LCD screen, the stronger the effect.
(7) Press EXIT to return to FN.
(8) Press PHOTO deeper to start recording.
The image displayed on the LCD screen will be recorded on a “Memory Stick.”
Recording is complete when the bar scroll indicator disappears.