Sony DCR-IP210 - Manual (Page 95)

95
Editing
Making your own titles
To return to FN
Press EXIT.
To change a title you have stored
In step 5, select CUSTOM1 SET or CUSTOM2 SET depending on which title you want
to change, then press EXEC and enter the new title as desired.
To superimpose your own title on tape
Follow the procedure in “Superimposing a title on starting a recording” on page 88.
If you take five minutes or longer to enter characters in the standby mode while a
cassette is in your camcorder
The power automatically goes off. The characters you have entered remain stored in
memory. Set the POWER switch to (CHG) OFF and start again from step 1 to complete
your title.
We recommend setting the POWER switch to VCR (p. 96) or removing the cassette so
that your camcorder does not automatically turn off while you are entering title
characters.
To erase the character
Press
T. The last character is erased.
To enter a space
Press
t.
To enter the character on the same button in succession
Press
t to move the cursor to the next position, and enter the character.