Sony DCR-IP210 User Manual

Page 45

Advertising
background image

45

Playback – Basics

Various playback modes

To operate video control buttons, set the POWER switch to VCR.

To view a still image (playback pause)

•Press

during playback. To resume playback, press

again.

•Press PAUSE on the Remote Commander during playback. To resume normal

playback, press PAUSE again.

To fast-forward the tape

•Press

in the stop mode. To resume normal playback, press

.

•Press FF on the Remote Commander in the stop mode. To resume normal playback,

press PLAY.

To rewind the tape

•Press

in the stop mode. To resume normal playback, press

.

•Press REW on the Remote Commander in the stop mode. To resume normal playback,

press PLAY.

To locate a scene monitoring the picture (picture search)

•Keep pressing

or

during playback. To resume normal playback, release the

button.

•Keep pressing REW or FF on the Remote Commander during playback. To resume

normal playback, release the button.

To monitor the high-speed picture while fast-forwarding or
rewinding the tape (skip scan)

•Keep pressing

while rewinding or

while advancing the tape. To resume

rewinding or advancing, release the button.

•Keep pressing REW on the Remote Commander while rewinding the tape, or keep

pressing FF on the Remote Commander while advancing the tape. To resume normal
rewinding or advancing, release the button.

To view the picture at slow speed (slow playback)

Press SLOW on the Remote Commander during playback. To pause playback, press

or PAUSE on the Remote Commander. To resume normal playback, press

or

PLAY on the Remote Commander again.

To search the last scene recorded (END SEARCH)

Press END SCH on PAGE2 in the stop mode. The last five seconds of the recorded
section are played back then your camcorder stops.

Video control buttons on the LCD screen

To play back or pause a tape
To stop a tape
To rewind a tape
To fast-forward a tape

When the playback pause mode lasts for five minutes
Your camcorder automatically enters the stop mode. To resume playback, press

or

PLAY on the Remote Commander.

Playing back a tape

Advertising
This manual is related to the following products: