Sony DCR-IP210 - Manual (Page 21)

21
Getting Started
Connecting to a wall outlet
When you use your camcorder for a long time, we recommend that you power it from a
wall outlet using the AC power adaptor.
(1) Open the jack cover and connect the supplied AC power adaptor to the DC IN
jack on your camcorder with the plug’s v mark facing down.
(2) Connect the power cord to the AC power adaptor.
(3) Connect the power cord to a wall outlet.
PRECAUTION
The set is not disconnected from the AC power source (house current) as long as it is
connected to the wall outlet, even if the set itself has been turned off.
Notes
• The AC power adaptor can supply power even if the battery pack is inserted in your
camcorder.
• The DC IN jack has “source priority.” This means that the battery pack cannot supply
any power if the power cord is connected to the DC IN jack, even when the power
cord is not plugged into a wall outlet.
A car battery
You cannot use a car battery with your camcorder.
Step 1 Preparing the power supply
2,3 1
To a wall outlet