Sony DCR-IP210 - Manual (Page 36)

36
Indicators displayed in the recording mode
The indicators are not recorded on the tape.
Remaining battery time indicator during recording
The remaining battery time indicator shows the approximate recording time. The
indicator may not be correct, depending on the conditions in which you are recording.
When you close the LCD panel and open it again, it takes about one minute for the
correct remaining battery time in minutes to be displayed.
Tape counter
The tape counter can be reset using COUNT RESET in the PAGE3 screen.
Recording data
The recording data (date/time or various settings when recorded) are not displayed
during recording. However, they are recorded automatically onto the tape. To display
the recording data, press DATA CODE during playback. You can also use the Remote
Commander for this operation (p. 43).
Recording a picture
0:00:01
45min
50 min REC
FN
NOV 15 2002 12:05:56 PM
micro Cassette Memory
Remaining battery time
STBY/REC
Remaining tape
This appears after you insert a cassette and record or play back for a
while.
Tape counter
FN button
Press this button to display operation buttons on the LCD screen.
Time
The time is displayed about five seconds after the power is turned on.
Date
The date is displayed about five seconds after the power is turned on.