Sony DCR-IP210 - Manual (Page 38)

38
Using Super NightShot
Super NightShot makes subjects more than 16 times brighter than those recorded in
NightShot.
(1) Set the POWER switch to CAMERA.
(2) Set NIGHTSHOT/NIGHTFRAMING to NIGHTSHOT. The
and
”NIGHTSHOT” indicators flash on the LCD screen.
(3) Press SUPER NS.
The and ”SUPER NIGHTSHOT” indicators flash on the LCD screen.
To cancel Super NightShot, press SUPER NS again and then set NIGHTSHOT/
NIGHTFRAMING to the center position (green z position).
Using the NightShot Light
The picture will be clearer with the NightShot Light on. To activate NightShot Light, set
N.S. LIGHT in
to ON in the menu settings (The default setting is ON.).
Using Color Slow Shutter
Color Slow Shutter enables you to record color images in a dark place.
(1) Set the POWER switch to CAMERA.
(2) Set NIGHTSHOT/NIGHTFRAMING to the center position (green z position).
(3) Press COLOR SLOW S.
The and COLOR SLOW SHUTTER indicators flash on the LCD screen.
To cancel Color Slow Shutter, press COLOR SLOW S again.
Notes
•Do not use the NightShot in bright places (ex. outdoors in the daytime). This may
cause your camcorder to malfunction.
•While using the NightShot in normal recording, the picture may be recorded in
incorrect or unnatural colors.
•If focusing is difficult with the autofocus mode when using the NightShot, focus
manually.
•Do not cover the NightShot Light emitter when using the NightShot.
•Detach the lens hood when you shoot with the NightShot Light since the lens hood
may block the NightShot Light.
Recording a picture
SUPER NS
COLOR SLOW S
NIGHTSHOT
NIGHTFRAMING