Sony DCR-IP210 - Manual (Page 111)

111
“Memory Stick” Operations
You can record still images on a “Memory Stick.”
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY.
(2) Keep pressing PHOTO lightly. The green z mark stops flashing, then lights
up. The brightness of the image and the focus are adjusted and fixed while
your camcorder is targeted at the middle of the image. Recording does not
start yet.
(3) Press PHOTO deeper. The image displayed on the LCD screen will be
recorded on a “Memory Stick.”
You can record still images on a “Memory Stick” in the recording standby
mode or while recording on tape in CAMERA mode
For the details, see page 47.
Recording still images on a “Memory
Stick” – Memory photo recording
3
2
1 / 12
FN INDEX PLAY
FN INDEX PLAY
SFN
1600
SFN
1600
NETWORK
NETWORK
1
MEMOR
Y/NETWORK
CAMERA
(CHG)
OFF
ON
MODE
VCR
POWER
[a] Number of recorded images
[b] Approximate number of images can be
recorded on the “Memory Stick”
[a] [b]