Sony DCR-IP210 - Manual (Page 133)

133
“Memory Stick” Operations
Your camcorder can read moving picture data recorded on a tape and record it as a
moving picture on a “Memory Stick.” Your camcorder can also take in moving picture
data through the input connector and record it as a moving picture on a “Memory
Stick.”
Before operation
• Insert a recorded tape into your camcorder.
• Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to VCR.
(2) Press
. The picture recorded on the tape is played back.
(3) Press START/STOP at the scene where you want to start recording from.
Quality mode Maximum recordable time
SUPER FINE 45 s
FINE 1 min 10 s
STANDARD 2 min 20 s
LIGHTMODE 4 min 40 s
To stop recording
Press START/STOP.
Note
Sound recorded in stereo is converted to monaural sound when recording from a tape.
When the “Memory Stick” access lamp is lit or flashing
Do not shake or strike the unit. As well do not turn the power off, eject a “Memory
Stick” or take out the battery pack. Otherwise, the image data breakdown may occur.
Titles which have already been recorded on tapes
You cannot record the titles on the “Memory Stick.” The title does not appear while
you are recording a moving picture with START/STOP.
Recording date/time
The date/time when it is recorded on a “Memory Stick” is recorded. Various settings
are not recorded. Data codes recorded on a tape cannot be recorded on a “Memory
Stick”.
Recording a picture from a tape as a
moving picture
3
BBB
N
FN
2
50min
REC
0:15:42
0:03
[15sec]
SFN
[a] Recording time indicator can be recorded
on the “Memory Stick.”
[b] This indicator is displayed for five
seconds after pressing START/STOP.
This indicator is not recorded.
[a]
[b]