Sony DCR-IP210 - Manual (Page 136)

136
You can play back still images recorded on a “Memory Stick.” You can also play back
six images including moving pictures on single screen arranged in the same order as a
“Memory Stick” by selecting the index screen.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY or VCR.
(2) Press PLAY or
PB. The last recorded image is displayed.
(3) Press –/+ to select the desired still image.
– : To see the previous image
+ : To see the next image
To stop memory photo playback
Press CAM, VCR on your camcorder or MEMORY PLAY on the Remote Commander.
Note
You may not be able to play back images with your camcorder:
– When playing back image data modified on your computers
– When playing back image data shot with other equipment
Playback still images recorded on the “Memory Stick”
Playback images are not output from the i.LINK (MICROMV Interface).
File name
•The directory number may not be displayed and only the file name may be displayed
if the structure of the directory does not conform to the DCF standard.
•“ - DIRECTORY ERROR” may appear on the LCD screen if the structure of the
directory does not conform to the DCF standard. If this message appears, you can play
back images but cannot record them on the “Memory Stick.”
•The file name flashes on the LCD screen if the file is corrupted or the file is
unreadable.
Viewing a still image
– Memory photo playback
1
MEMOR
Y/NETW
ORK
CAMERA
(CHG)
OFF
ON
MODE
VCR
2
PLAY
PB
POWER
or