Sony DCR-IP210 - Manual (Page 141)

141
“Memory Stick” Operations
Copying still images recorded on a
“Memory Stick” to a tape
You can copy still images recorded on a “Memory Stick” and record them to a tape. You
can also use the Remote Commander for this operation.
Before operation
•Insert a tape for recording into your camcorder.
•Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to VCR.
(2) Using the video control buttons, search a point where you want to record the
desired images and stop playback.
(3) Press PB. The last recorded image is displayed.
(4) Press –/+ to select the desired image.
– : To see the previous image
+ : To see the next image
(5) Press FN and go to PAGE3.
(6) Press q REC CTRL, then REC START.
Copying starts.
Press REC PAUSE at the scene where you want to stop recording.
(7) If you have more to copy, repeat steps 4 to 6.
To stop copying in the middle
Press on the LCD screen or STOP on the Remote Commander.
To return to FN
Press RET. after step 6, then press EXIT.
6
3 5
FN
PAGE3
PB
100–0026
– +
REC
PAUSE
REC CTRL MEMORY PLAY
RET.
REC
START
100–0026
– +
REC
PAUSE
REC CTRL
0:00:07
MEMORY PLAY
RET.
REC
START
1600
26/26