Self-timer recording, Self timer – Sony DCR-IP210 User Manual

Page 40

Advertising
background image

40

Self-timer recording

Recording automatically starts in about 10 seconds after you set the self-timer. You can
also use the Remote Commander for this operation.

(1) Set the POWER switch to CAMERA.
(2) Press FN to display PAGE1 (p. 27).
(3) Press SELFTIMER.

The

(self-timer) indicator appears on the LCD screen.

(4) Press EXIT to make PAGE1 disappear.
(5) Press START/STOP.

The self-timer starts counting down from about 10 with a beep sound. In the
last two seconds of the countdown, the beep sound gets faster, then recording
starts automatically.

To stop the countdown

Press START/STOP.
To restart the countdown, press START/STOP again.

To cancel self-timer recording

Press SELFTIMER so that the

(self-timer) indicator disappears from the LCD screen

while your camcorder is in the standby mode. You cannot cancel self-timer recording
using the Remote Commander.

Note
The self-timer recording is automatically canceled when:
– Self-timer recording is finished.
– The POWER switch is set to (CHG) OFF or VCR.

Recording a picture

2

FN

5

3

SELF

TIMER

START/STOP

Advertising
This manual is related to the following products: