Sony DCR-IP210 - Manual (Page 41)

41
Recording – Basics
You can go to the end of the recorded section after you record. It is convenient when
you make the transition between the last recorded scene and the next scene you record
smooth.
(1) Set the POWER switch to CAMERA.
(2) Press FN to display PAGE1 (p. 27).
(3) Press END SCH.
The last five seconds of the recorded section are played back and your
camcorder returns to the standby mode. You can monitor the sound from the
speaker or headphones.
To return to FN
Press EXIT after step 3.
To stop searching
Press END SCH again.
Even once you eject the cassette
The end search function works.
Checking the recording – END SEARCH
2,3
FN
END
SCH