Rear panel parts descriptions, Location and functions of parts – Sony SCD-XA9000ES User Manual
Page 12
12
US
Location and Functions of Parts
Rear Panel Parts Descriptions
1
ANALOG 5.1CH OUT jacks (5)
Connect to an amplifier equipped with the 5.1CH
input jacks (Multi-channel amplifier, AV amplifier,
etc.) using the audio connecting cords.
2
DIGITAL (CD) OUT COAXIAL connector (8)
Connect to an audio component using the coaxial
digital cable.
3
DIGITAL (CD) OUT OPTICAL connector (8)
Connect to an audio component using an optical
digital cable.
4
i.LINK S200 AUDIO OUT jack (7)
Connect to STR-DA9000ES/TA-DA9000ES using the
i.LINK connecting cord.
5
AC IN terminal (9)
Connect the AC power cord.
6
ANALOG 2CH OUT L/R jacks (6)
Connect to an audio component (stereo/2 channel)
using the audio connecting cord.
Note
Only the audio signals of the CD can be output from the
DIGITAL (CD) OUT connectors shown in 2 and 3. Those of the
Super Audio CD cannot be output through DIGITAL (CD) OUT
connectors.
When the i.LINK indicator lights up
No signal is output from all the other jacks (ANALOG 2CH OUT
jacks, ANALOG 5.1CH OUT jacks, PHONES jack, DIGITAL (CD)
OUT jacks).
ANALOG
L
L
R
R
R
L
5.1CH OUT
2CH OUT
OUT
OPTICAL
COAXIAL
CENTER
FRONT
SURROUND
SUB WOOFER
DIGITAL(CD)
AC IN
AUDIO OUT
i.LINK S200