Specifications, Display messages – Sony SCD-XA9000ES User Manual

Page 32

Advertising
background image

32

US

Additional Information

When a super audio CD is played

Playing frequency range

2 Hz to 100 kHz

Frequency response

2 Hz to 50 kHz (–3 dB)

Dynamic range

108 dB or more

Total harmonic distortion rate

0.0012 % or less

Wow and flutter

Value of measurable limit (±0.001 %
W. PEAK) or less

When a CD is played

Frequency response

2 Hz to 20 kHz

Dynamic range

100 dB or more

Total harmonic distortion rate

0.0017 % or less

Wow and flutter

Value of measurable limit (±0.001 %
W. PEAK) or less

Output connector

*Output only the audio signals of the CD

i.LINK section

Pin

4 pins

Transmission speed

S200
(Maximum data transmission speed
200 Mbps)

Transmission protocol

A/M transmission protocol

Format (output)

Super Audio CD* (DSD PLAIN)
2 channel linear PCM (IEC 60958-3)
Sampling frequency: 44.1 kHz

* Conforms to the copy protection technology of DTLA (Revision

1.2).

ANALOG OUT

DIGITAL (CD)
OUT
OPTICAL*

DIGITAL (CD)
OUT
COAXIAL*

PHONES

Jack type

Phono
jacks

Square
optical
output
connector

Coaxial
output
connector

Stereo
phone jack

Output level

2 Vrms
(at 50 kilohms)

–18 dBm

0.5 Vp-p

10 mW

Load impedance

Over 10 kilohms

Light emitting
wave length:
660 nm

75 ohms

32 ohms

( )

Specifications

The following table explains the various messages that
appear in the display.

Message

Error code(s) Cause and/or remedy

TOC ERROR

An incompatible disc is inserted.

BUS FULL

C78:15

The signal bus within the i.LINK
configuration is full and no more
signals can be output from the
player. Cancel the LINC between
the component and this player.

Display Messages

Advertising