Sony SCD-XA9000ES - Manual (Page 24)

Playing Discs
24 US
Listening to a CD Using a
Filter
(Digital Filter Function)
This player is equipped with a digital filter that eliminates
noise generated during sampling. By selecting type of
filters, you can adjust the sound quality.
You can select “STANDARD” or “OPTION.” (The default
setting is “STANDARD.”)
When the i.LINK indicator is lit
This function is not available.
1
Press MENU.
2 Turn . AMS > until “D. FILTER” appears in the
display.
3
Press . AMS >.
4
Turn . AMS > until desired filter name
(“STANDARD” or “OPTION”) appears in the display.
5 Press . AMS >.
When you select “OPTION,” “FILTER” appears in the
display.
Characteristics of each digital filter
STANDARD
Provides a wide frequency range and spatial feeling.
OPTION
Provides smooth and powerful sound with clear image
position.
Notes
• Digital filters are effective only when you play a conventional
CD. You cannot select the digital filter when you play a Super
Audio CD.
• According to the disc or connected equipment, there may be no
noticeable effect after switching the filter.
. AMS> MENU
Setting the DIGITAL OUT on/
off
You can set the digital out mode to on (the digital signals
can be output) or off (the digital signals cannot be output).
When you use the DIGITAL (CD) OUT COAXIAL or
DIGITAL (CD) OUT OPTICAL connecter, set the digital
mode to on (“D.OUT ON”). (The default setting is
”D.OUT ON.”)
When the i.LINK indicator is lit
This function is not available.
1 Press MENU.
2
Turn . AMS > until “D. OUTPUT” appears in
the display.
3
Press . AMS >.
4 Turn . AMS > until desired digital mode
(“D.OUT ON” or “D.OUT OFF”) appears in the
display.
5 Press . AMS >.
Note
When you play a Super Audio CD, this function does not work
and no signal is output from the DIGITAL (CD) OUT connectors.
MENU . AMS>