Burst settings – Sony DSC-TX10 User Manual
Page 118
Precautions / About this camera
Top page > Using MENU items (Shooting) > MENU items (Shooting) > Burst Settings
Burst Settings
The camera shoots up to 10 continuous frames in one burst when you hold down the shutter
button.
1. MENU
(Burst Settings)
desired mode
(Off)
Records a single image.
(High) Shoots up to 10 images per second in succession.
(Low) Shoots up to 2 images per second in succession.
Notes
[Flash] is set to [Off].
When recording with the self-timer, a series of up to 10 images is recorded.
The recording interval becomes longer, depending on the setting for the image size.
[Focus], [White Balance], and [EV] are adjusted for the first image, and these settings are
also used for the other images.
[VGA] image size will be set while recording on internal memory.
When the battery level is low, or internal memory or memory card is full, the burst stops.
In slow shutter speed conditions, the burst shots per second may be decreased.
You may not be able to set some functions or MENU items depending on the selected REC
mode. For details, see “MENU items not available in some REC modes.”
Copyright 2011 Sony Corporation
118