Sony DSC-TX10 User Manual

Page 255

Advertising
background image

Macro shooting cannot be turned off.

There is no function for forcibly turning off macro shooting. In [Auto] mode, you can even
shoot a distant subject.

The date and time are not displayed on the screen.

While shooting, the date and time are not displayed. They are displayed only during playback.

The F value and shutter speed flash when you press and hold the

shutter button halfway down.

The exposure is incorrect. Correct the exposure.

[Details]

The image colors are not correct.

Adjust the White Balance.

[Details]

Noise appears in the image when you view the screen in a dark place.

The camera is attempting to increase the visibility of the screen by temporarily brightening the
image under conditions of low illumination. There is no effect on the recorded image.

There is a dark shadow on the image.

Depending on the brightness of the subject, you may see a dark shadow when you change
the aperture. This is not a malfunction.

The eyes of the subject come out red.

Set [Red Eye Reduction] to [Auto] or [On].

[Details]

Shoot the subject at a distance closer than the flash range using the flash.

Light the room and shoot the subject.

Retouch the image using [Retouch]

[Red Eye Correction] in viewing menu, or correct

using “PMB”.

[Details]

Dots appear and remain on the screen.

This is not a malfunction. These dots are not recorded.

Cannot shoot images in succession.

You cannot shoot images in succession while the Smile Shutter function is activated.

The internal memory or memory card is full. Delete unnecessary images.

[Details]

[Details]

The battery level is low. Insert a charged battery pack.

The same image is shot several times.

Set [Burst Settings] to [Single].

[Details]

[Scene Recognition] is set to [Advanced].

[Details]

255

Advertising
This manual is related to the following products: