Gps (dsc-tx100v only) – Sony DSC-TX10 User Manual
Page 259
Precautions / About this camera
Top page > Troubleshooting > Troubleshooting > GPS (DSC-TX100V only)
GPS (DSC-TX100V only)
The camera is not receiving a GPS signal.
Your camera may not be able to receive radio signals from GPS satellites because of
obstructions.
To triangulate the location information correctly, bring your camera to an open area, and turn
on the camera again.
Excessive error in location information.
The margin of error can be up to several-hundred meters depending on surrounding
buildings, GPS signal strength, etc.
It takes time to triangulate although [GPS assist data] is taken in.
[Date & Time Setting] is not set, or set time is shifted greatly. Set the date and time correctly.
The term of validity of assist data has expired. Update [GPS assist data].
As the positions of GPS satellites vary constantly, it may take longer to determine the location
or the receiver may not be able to determine the location at all, depending on the location and
time you use the camera.
“GPS” is a system for determining geographic location by triangulating radio signals from GPS
satellites. Avoid using the camera in places where radio signals are blocked or reflected, such
as a shadowy place surrounded by buildings or trees, etc. Use the camera in open sky
environments.
The location or direction information has not been recorded.
The shooting direction is not recorded when shooting movies.
Use “PMB” to import movies with GPS location information to your computer.
Excessive error in compass information
Do not place the camera in close proximity to a magnetic source, or a metal.
Copyright 2011 Sony Corporation
259