Starting up “pmb portable” (macintosh) – Sony DSC-TX10 User Manual
Page 242
Precautions / About this camera
Top page > Using with your computer > Uploading images to a media service > Starting up
“PMB Portable” (Macintosh)
Starting up “PMB Portable” (Macintosh)
1. Make a USB connection between the camera and a Macintosh computer.
When you connect the camera and your computer, [PMBPORTABLE] appears on the
desktop.
Click [×] to close any unnecessary drives.
2. Click [PMBP_Mac] in the [PMBPORTABLE] folder.
The Region Selection screen appears.
3. Select the appropriate [Region] and [Country/Area], and then click [OK].
The User Agreement screen appears.
4. Read the agreement carefully. If you accept the terms of the agreement, click [I Agree].
“PMB Portable” starts up.
Notes
“PMB Portable” is not supported for movies in AVCHD view.
Set [LUN Setting] in [Main Settings] to [Multi].
In case you cannot start up “PMB Portable”, set [USB Connect Setting] to [Mass Storage].
Always connect to a network when using “PMB Portable”.
When uploading images over the Internet, the cache may remain in the computer being
used depending on the service provider. This is also true when this camera is used for this
purpose.
When a bug occurs in “PMB Portable” or you delete “PMB Portable” by mistake, you can
repair “PMB Portable” by downloading the PMB Portable installer from the website.
Movie in AVCHD view description as follows:
DSC-TX10: AVCHD-format movies
DSC-TX100 / TX100V: Recorded with [Movie format] set to [AVCHD 50i/50p] or [AVCHD
60i/60p].
Copyright 2011 Sony Corporation
242