Sony DSC-TX10 - Manual (Page 131)

(Advanced) turn green.
When two frames are shot, the two images are displayed side by side
immediately after shooting.
When [Anti Blink] is displayed, 2 images are taken automatically and the
image with the eyes open is selected automatically. [Details]
Notes
Scene Recognition function does not operate when you shoot images using digital zoom.
(Portrait), (Twilight Portrait) or (Backlight Portrait) are not recognized in Tracking
Focus mode.
The available flash settings are [Auto] and [Off].
These scenes may not be recognized depending on the situation.
When using (Tripod) and (Twilight ) at the same time, sometimes cannot be recognized
in an environment where vibrations are transferred to the camera even though it is fixed on
a tripod.
Sometimes a slow shutter results when a scene is recognized as a (Tripod) and
(Twilight ) at the same time. Keep the camera still during shooting.
You may not be able to set some MENU items depending on the selected REC mode. For
details, see “MENU items not available in some REC modes.”
[Details]
Advanced mode
In [Advanced] mode, the camera shoots two images consecutively with the settings differing as
follows when it recognizes (Twilight ),
(Twilight Portrait), (Backlight) or (Backlight
Portrait) scenes, which tends to blur. You can select the desired image from the two images shot.
First Image* Second Image
Shoots in Slow Synchro
Shoots with sensitivity increased and shake
reduced
Shoots in Slow Synchro with the face
which the flash strobes on as guide
Shoots with sensitivity increased with the face
as guide and shake reduced
Shoots in Slow Synchro
Shoots with even slower shutter speed without
increasing sensitivity.
Shoots with the flash
Shoots with the brightness and contrast of the
background adjusted
Shoots with the face which the flash
strobes on as guide
Shoots with the brightness and contrast of the
face and the background adjusted
* When [Flash] is set to [Auto].
What is the Anti Blink function?
When set to [Advanced], the camera automatically shoots two images consecutively* when it
recognizes (Portrait) or
(Infant). The camera will select, display, and record the image
which the eyes are not blinked automatically. If the eyes are closed in both images, the
message “Blinked eye detected” is displayed.
* except when the flash strobes/when the shutter speed is slow.
Back to top
Copyright 2011 Sony Corporation
131