Underwater isweep panorama (dsc-tx10 only), Details – Sony DSC-TX10 User Manual
Page 62
Precautions / About this camera
Top page > Shooting > Setting REC mode > Underwater iSweep Panorama (DSC-TX10 only)
Underwater iSweep Panorama (DSC-TX10 only)
When using Underwater iSweep Panorama, white balance is suited for shooting in underwater.
Allows you to create a panoramic image from composite images. The camera also automatically
detects people’s faces or moving subjects. Make any necessary settings that are set using the
touch panel before using the camera underwater.
1. Set to the shooting mode.
2.
(REC Mode)
(Panorama Shooting Scene)
(Underwater iSweep
Panorama)
3. Align the camera with the end of the subject to be shot and press the shutter button fully.
(A) will not be taken.
Touch (B) to change the shooting direction. Make any necessary settings that are set using
the touch panel before using the camera underwater.
4. Pan the camera to the end of the guide (C), following the indication on the screen.
Notes
If you cannot pan the camera across the entire subject within the given time, a gray area
occurs in the composite image. If this happens, move the camera faster to record a full
panorama image.
Since several images are stitched together, the stitched part will not be recorded smoothly.
Under low light conditions, panorama images may be blurred or the shooting may not be
successful.
Under lights that flicker, such as fluorescent lights, the brightness or color of the combined
images may not be consistent.
When the whole angle of panoramic shooting and the AE/AF locked angle are very different
in brightness, color and focus, shooting will not be successful. If this happens, change the
AE/AF locked angle and shoot again.
Sweep Panorama is not suitable in the following situations:
62