Sony STR-DH520 - Manual (Page 35)

35 GB
D:\NORM'S JOB\SONY HA\SO120020\STR-DH520_PMRF
02\4263361112_GB\GB04CON_STR-DH520-U2.fm masterpage: Right
STR-DH520
4-263-361-11(2)
Pre
p
ar
ing the
R
eceive
r
You can select the calibration type you want
and then perform the Auto Calibration.
1
Press AMP MENU.
2
Press V/v repeatedly to select
“A. CAL”, then press or b.
3
Press V/v repeatedly to select
“CUSTOM”, then press or b.
4
Press V/v repeatedly to select
the calibration type you want,
then press
.
• FULL.FLAT
Makes the measurement of frequency
from each speaker flat.
• ENGINEER
Sets to “the Sony listening room
standard” frequency characteristics.
• FRONT.REF
Adjusts the characteristics of all the
speakers to match the characteristics of
the front speaker.
• OFF
Sets the Auto Calibration equalizer
level to off.
The Auto Calibration starts
automatically.
5
Save the measurement result
(page 33).
Adjusting the speaker
levels
(TEST TONE)
You can adjust the speaker levels while
listening to the test tone from your seating
position.
1
Press AMP MENU.
2
Press V/v repeatedly to select
“LEVEL”, then press or b.
3
Press V/v repeatedly to select
“T. TONE”, then press .
Selecting the calibration type
AMP
MENU
,
V/v/B/b
Input
buttons
MASTER
VOL +/–/
2 +/–
continued