Sony STR-DH520 - Manual (Page 69)

69 GB
D:\NORM'S JOB\SONY HA\SO120020\STR-DH520_PMRF
02\4263361112_GB\GB09REM_STR-DH520-U2.fm masterpage: Right
STR-DH520
4-263-361-11(2)
Ad
ditional Inf
o
rmation
Specifications
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(USA model only)
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 90 watts per channel
minimum RMS power, with no more than
0.09% total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
USA model
1)
Minimum RMS Output Power
(8 ohms, 20 Hz – 20 kHz, THD 0.09%)
90 W + 90 W
Stereo Mode Output Power
(8 ohms, 1 kHz, THD 1%)
100 W + 100 W
Surround Mode Output Power 2)
(8 ohms, 1 kHz, THD 10%)
130 W per channel
Canada, Europe, Australia and Taiwan models
1)
Minimum RMS Output Power
(8 ohms, 20 Hz – 20 kHz, THD 0.09%)
85 W + 85 W
Stereo Mode Output Power
(8 ohms, 1 kHz, THD 1%)
100 W + 100 W
Surround Mode Output Power 2)
(8 ohms, 1 kHz, THD 10%)
130 W per channel
1) Measured under the following conditions:
2) Reference power output for front, center,
surround, surround back and front high speakers.
Depending on the sound field settings and the
source, there may be no sound output.
Frequency response
Analog 10 Hz – 70 kHz,
+0.5/–2 dB (with sound
field and equalizer
bypassed)
Input
Analog (PORTABLE IN)
Sensitivity: 1 V/50 kohms
S/N 3) : 96 dB (A, 500 mV 4) )
Analog (Except PORTABLE IN)
Sensitivity: 500 mV/
50 kohms
S/N 3) : 96 dB (A, 500 mV 4) )
Digital (Coaxial) Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
Digital (Optical) S/N: 100 dB
(A, 20 kHz LPF)
Output (Analog)
AUDIO OUT Voltage: 500 mV/1 kohm
SUBWOOFER Voltage: 2 V/1 kohm
Equalizer
Gain levels ±10 dB, 1 dB step
3) INPUT SHORT (with sound field and equalizer
bypassed).
4) Weighted network, input level.
FM tuner section
Tuning range 87.5 MHz – 108.0 MHz
Antenna (aerial) FM wire antenna (aerial)
Antenna (aerial) terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Antenna (aerial) Loop antenna (aerial)
Intermediate frequency
450 kHz
Area Power requirements
USA, Canada,
Taiwan 120 V AC, 60 Hz
Europe, Australia 230 V AC, 50 Hz
Area Tuning scale
10 kHz step 9 kHz step
USA, Canada 530 kHz –
1,710 kHz 531 kHz –
1,710 kHz
Europe, Australia,
Taiwan – 531 kHz –
1,602 kHz
continued