Sony STR-DA5700ES - Manual (Page 106)

106 US
Lets you output the test tone sequentially
from adjacent speakers.
Some items may not be displayed,
depending on the setting of the speaker
pattern.
3 Adjust “Level,” then press .
To output the source sound
from adjacent speakers
You can output the source sound from adjacent
speakers so that you can adjust the balance
between the speakers.
1 Select “Phase Audio,” then press .
The Phase Audio screen appears.
2 Adjust the parameter, then press .
• Off
• L/R, L/C, C/R, R/SR, SR/SBR, SR/SB*,
SBR/SBL, SR/SL, SB/SL*, SBL/SL,
LH/RH, SL/L, L/SR, SL/R, L/RH, LH/R
*“SR/SB” and “SB/SL” appear when only one
surround back speaker is connected.
Lets you output front 2 channel source
sound (instead of the test tone)
sequentially from adjacent speakers.
Some items may not be displayed,
depending on the setting of the speaker
pattern.
3
Adjust “Level,” then press .
Lets you set the analog downmix settings on or
off.
x Off
If the speaker pattern is set so that there is a
center speaker, this setting is set to “Off”
automatically.
x On
We recommend you set “Center Analog Down
Mix” to “On” to enjoy digital audio with high
quality sound when you do not have a center
speaker connected. Analog downmix works
when you set “Center Analog Down Mix” to
“On.” This setting is also effective to input
signals from the MULTI CHANNEL INPUT
jacks.
Lets you set the speaker impedance. For
details, see “7: Setting up the receiver using
the Easy Setup” (page 49).
x 4
Ω
x 8
Ω
Lets you select the unit of measurement for
setting distances.
x meter
The distance is displayed in meters.
x feet
The distance is displayed in feet.
Center Analog Down Mix
Speaker Impedance
Distance Unit