Sony STR-DA5700ES - Manual (Page 115)

115 US
Adj
u
stin
g Sett
ings
Network Settings
You can adjust the settings for the network.
Lets you check or change the network settings.
You can change the settings for the following
items either manually or automatically.
– IP Address
– DNS
– Proxy Server
Connect the receiver to the network
beforehand. For details, see “5: Connecting to
the network” (page 45).
Lets you set whether or not to display the
connected DLNA server.
x Renderer Name
Shows the renderer name of the receiver.
x Auto Access Permission
Sets whether or not to allow automatic access
from newly detected DLNA controller.
Lets you set whether or not to accept
commands from DLNA controllers.
Let you turn the function which controls the
receiver from “ES Remote” on the home
network on or off.
x Off
x On
Lets you turn the function that activates the
switching hubs on the rear of the receiver and
allows network controller, “ES Remote,” etc.,
to control the receiver on or off even when the
receiver is in standby mode. In standby mode,
the start-up time of the network function is
reduced after the receiver is turned on.
x Off
The network function turns off when the
receiver is in standby mode.
x On
The network function works even when the
receiver is in standby mode.
Internet Services
Settings
Lets you set or change the password for the
parental control function. A password allows
you to set a restriction on Internet video
playback.
Playback of some Internet videos can be
limited according to the geographic area.
Scenes may be blocked or replaced with
different scenes.
Set the function in accordance with the on-
screen instructions.
Internet Settings
Connection Server Settings
Renderer Options
Renderer Access Control
External Control
Network Standby
Parental Control Password
Parental Control Area Code
Code Area Code Area
2044 Argentina 2304 Korea
2047 Australia 2333 Luxembourg
2046 Austria 2363 Malaysia
2057 Belgium 2362 Mexico
2070 Brazil 2376 Netherlands
continued