Sony STR-DA5700ES - Manual (Page 75)

75 US
Enjo
yi
ng Sou
nd Eff
e
cts
About the effect level for True
Concert Mapping A/B
You can set the reverberation level for the
“True Concert Mapping A/B” sound field.
This function is available when the speaker
pattern is set so that there are front high
speakers, and “Sound Field Mode” is set to
“Front High.”
x Low
Turns down the reverberation volume level.
x Mid
Sets the reverberation volume level to the
factory default.
x High
Turns up the reverberation volume level.
About the gain level for PLIIz
Height
You can adjust the gain level of the front height
channels for Pro Logic IIz mode (common for
movie and music).
x Low
No gain will be applied.
x Mid
+3 dB will be applied (factory default setting).
x High
+5 dB will be applied.
Lets you set whether or not to output sound
from the front high speakers.
This function is available when one of the
following sound fields is selected, and the
speaker pattern is set so that there are front
high speakers.
– HD-D.C.S.
– Berlin Philharmonic Hall
– True Concert Mapping A/B
– Jazz Club
– Live Concert
– Stadium
– Sports
– Neo:X Cinema/Music/Game
x Front High
Outputs sound from the speakers, including
the front high speakers (factory default
setting).
If you connect the surround back speakers and
the front high speakers to the SURROUND
BACK (ZONE 2) terminals and the FRONT
B/FRONT HIGH terminals, respectively,
sound is not output from the surround back
speakers.
x Standard
Outputs sound from the speakers, except the
front high speakers.
Note
Depending on the setting or the audio format, sound
may not be output from the front high speakers even
if you set “Sound Field Mode” to “Front High.”
• The sound fields do not work when “MULTI
IN” is selected.
• You cannot select “2ch Analog Direct” when
you play back content via a USB device, a
home network, or Internet video.
• “Multi Stereo” does not work when multi-
channel audio signals are being received.
• The sound fields for movie and music may
not work, depending on the input or the
speaker pattern you select, or with audio
formats.
• The receiver may play back signals at a
lower sampling frequency than the actual
sampling frequency of the input signals,
depending on the audio format.
• “PLIIx Movie/Music,” “PLIIz Height,” and
“Vocal Height” do not appear, depending on
the speaker pattern you select.
• Some speakers or the subwoofer may not
output sound, depending on the sound field
setting.
Sound Field Mode
Notes on the sound fields
continued