Sony PEG-TG50 - Manual (Page 17)

17
A
bout CL
IE L
a
u
n
c
h
er
/
I ca
nnot
pe
rf
or
m a Hot
Sync
®
operation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I cannot perform a HotSync
®
operation
The applications on a “Memory Stick” media are not
displayed
B You can display only the applications that stored in the folder “/PALM/
Launcher.”
Move the application to the folder “/PALM/Launcher.”
Also, the applications are not displayed if the
Show Expansion Cards
check box in the CLIE Launcher Preferences screen is not selected.
b For details, refer to “Sony CLIÉ™ handheld basic operations: Using “CLIE
Launcher”: Menu List” in the “Handbook.”
B When the battery of your CLIÉ handheld is running low, the data on a
“Memory Stick” media may not be displayed.
Recharge the battery of your CLIÉ handheld.
The CLIE Launcher groups and the categories of the Palm
OS
®
standard screen are different
B The CLIE Launcher groups are classified into groups such as Picture ,
Movie , etc., depending on what can be performed on your CLIÉ handheld.
Performing initial checks
Checking your CLIÉ handheld
B Is the Palm™ Desktop for CLIÉ software installed?
B Is the connector between your CLIÉ handheld and cradle dirty?
To clean the connector, try repeatedly placing your CLIÉ handheld in the
cradle and taking it out again.
B Are the CLIÉ handheld and cradle correctly connected?
Check that the Battery Indicator on your CLIÉ handheld screen is
. If is displayed, place your CLIÉ handheld in the cradle
properly.
Continued on next page
• • • • • • • • • • • • • • • • • • • •