Sony PEG-TG50 - Manual (Page 28)

28
The HotSync
®
operation does not start and a message is
displayed on the screen
B Move your CLIÉ handheld away from the IR port of your computer except
when performing an IR HotSync
®
operation, as a malfunction may occur.
You can also disable the IR feature by setting Beam Receive to Off from
General in the Preferences screen.
B If you set the IR port to search automatically for the target IR devices on
your computer, follow the procedure below to disable the function.
1 Select the Start menu, Settings (except for Windows XP), and
Control Panel .
2 Double-click the Infrared icon (the Wireless Link icon in Windows
2000 Professional/Windows XP).
3 Click the Sending image tab.
4 Clear the check box Send the image from the digital camera
to your computer using the wireless link and click OK .
5 Click the HotSync icon in the task tray in the bottom right-hand
corner of your computer screen and enable Infrared in the menu.
An error message saying there is insufficient memory
appears while receiving data using the IR port or the
Bluetooth communication
B To receive data using the IR port or the Bluetooth communication, the free
space of your CLIÉ handheld’s memory must be more than twice the size
of data to be received. If the memory space of your CLIÉ handheld is
insufficient, delete any unnecessary data after backing up data as needed.
B Perform a soft reset by pressing the reset button.
b For details, refer to “Basic operations of your Sony CLIÉ™ handheld:
Restarting your Sony CLIÉ handheld” in the “Read This First (Operating
Instructions).”