Sony STRDH830 - Manual (Page 49)

49 GB
D:\NORM'S JOB\SONY HA\SO130042\STR-DH830_DH730_PMRF
03\4408151122_GB\GB04GET_STR-DH730-CEL.fm masterpage: Right
STR-DH830/STR-DH730
4-408-151-12(2)
T
u
n
e
r Op
era
tio
ns
2
Press SHIFT, then press
numeric buttons to enter the
frequency.
Example 1: FM 102.50 MHz
Select 1
b 0 b 2 b 5 (b 0*)
Example 2: AM 1,350 kHz
Select 1
b 3 b 5 b 0
* Press 0 for Europe, Mexico, Australia and
Taiwan models only.
Tip
Adjust the direction of the AM loop antenna
(aerial) for optimum reception upon tuning to
an AM station.
3
Press .
If you cannot tune to a station
“– – – .– – MHz” or “– – – – kHz” appears and
then the screen returns to the current
frequency.
Make sure you have entered the right
frequency. If not, repeat step 2. If you still
cannot tune to a station, the frequency may not
be in use in your area.
(USA, Canada and Mexico models
only)
You can change the AM tuning scale to either
9 kHz or 10 kHz using the buttons on the
receiver.
1
Press ?/1 to turn off the
receiver.
2
While holding down TUNING
MODE, press ?/1 on the
receiver.
3
Change the current AM tuning
scale to 9 kHz (or 10 kHz).
To reset the scale to 10 kHz (or 9 kHz),
repeat the procedure above.
Note
All preset stations will be erased when you change
the tuning scale.
Presetting FM/AM radio
stations
(Preset Tuning)
You can store up to 30 FM and 30 AM stations
as your favorite stations.
1
Tune to the station that you
want to preset using Auto
Tuning (page 48) or Direct
Tuning (page 48).
2
Press TOOLS/OPTIONS.
The option menu appears.
3
Select “Memory”, then press
or b.
4
Select a preset number, then
press .
The station is stored as the selected preset
number.
Changing the AM tuning scale
?/1
TUNING MODE
V/v/B/b,
TOOLS/
OPTIONS
continued