Sony STRDH830 - Manual (Page 38)

38 GB
D:\NORM'S JOB\SONY HA\SO130042\STR-DH830_DH730_PMRF
03\4408151122_GB\GB04GET_STR-DH730-CEL.fm masterpage: Left
STR-DH830/STR-DH730
4-408-151-12(2)
6
Press to confirm the
selected calibration type.
7
Follow steps 5 to 9 in
“Performing Auto Calibration”
(page 35).
Guide to on-screen
display operation
You can display the menu of the receiver on
the TV screen and select the function you want
to use on the TV screen by pressing
V/v/B/b
and on the remote control.
To display the menu of the receiver on the TV
screen, make sure that the receiver is in “GUI
MODE” following the steps in “To turn “GUI
MODE” on and off” (page 39).
1
Switch the input of the TV so
that an image of the menu is
displayed.
2
Press GUI MODE.
After “GUI ON” appears on the display
panel for a while, the GUI menu appears
on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
Depending on the TV, the GUI menu may
take some time to appear on the TV
screen.
3
Press V/v repeatedly to select a
menu you want, then press
or b to enter the menu.
The menu item list appears on the TV
screen.
Example: When you select “
Input”.
4
Press V/v repeatedly to select
the menu item you want to
adjust, then press
to enter
the menu item.
5
Repeat steps 3 and 4 to select
the parameter you want.
To return to the previous screen
Press RETURN/EXIT O.
To exit the menu
Press MENU.
Using the menu
V/v/B/b,
GUI MODE
MENU
TOOLS/
OPTIONS RETURN/
EXIT O