Sony STRDH830 - Manual (Page 55)

55 GB
D:\NORM'S JOB\SONY HA\SO130042\STR-DH830_DH730_PMRF
03\4408151122_GB\GB05ENJ_STR-DH730-CEL.fm masterpage: Right
STR-DH830/STR-DH730
4-408-151-12(2)
En
jo
yi
ng
So
un
d
Eff
e
cts
Using Advanced Auto
Volume function
This receiver can adjust the volume
automatically depending on the input signal or
content from the connected equipment.
This function is useful, for example, when the
sound of a commercial is louder than the TV
programs.
Press AUTO VOL to select “A.VOL
ON”.
The advanced auto volume function is set to on
and off as you press AUTO VOL.
Notes
• Be sure to reduce the volume level before you turn
on/off this function.
• As this function is available only when Dolby
Digital, DTS or Linear PCM signals are input, the
sound may suddenly increase when you switch to
other formats.
• This function does not work in the following cases.
– Linear PCM signals with a sampling frequency
of more than 48 kHz are being received.
– Dolby Digital Plus, Dolby TrueHD, DTS 96/24,
DTS-HD Master Audio, or DTS-HD High
Resolution Audio signals are being received.
Resetting sound fields to
the default settings
Be sure to use the buttons on the receiver to
perform this operation.
1
Press ?/1 to turn off the
receiver.
2
While holding down MUSIC,
press ?/1.
“S.F. CLEAR” appears on the display
panel and all sound fields are reset to their
default setting.
AUTO
VOL
?/1
MUSIC