Panasonic HC-W850K - Manual (Page 158)

- 158 -
Broadcasting live
Press Wi-Fi button and touch [Live Cast].
≥ If a “LUMIX CLUB” Login ID and Password has not been registered to this unit yet, enter them
according to the screen.
≥ If you touch [Change AP], you can switch the wireless access point to another one that has been
registered to this unit.
≥ When the connection is made correctly, the screen of this unit switches to the Live Cast Mode.
∫ To send e-mails
You can send e-mails containing such information as the USTREAM channel name or the
scheduled broadcast date.
≥ This unit can only set the scheduled broadcast date. (
l 160 ) For other settings, set them on the
“LUMIX CLUB”.
≥ On the “LUMIX CLUB”, register the destination addresses of the e-mail in advance.
Touch .
≥ / / will disappear when no touch function is
performed for a specific period of time. To display them again,
touch the screen.
∫ To start the live broadcast
Touch .
≥ If you press the start recording button, you can simultaneously
record the broadcast to this unit.
≥ / / will disappear when no touch function is
performed for a specific period of time. To display them again,
touch the screen.
∫ To stop the live broadcast
Touch .
≥ When (gray) is displayed, unsent data is present. Wait until the unsent data is sent and is
displayed.
To exit the Live Cast Mode:
Touch [EXIT] or press Wi-Fi button.
≥ A message is displayed. Touch [YES] to exit.

R 1h20m R 1h20m R 1h20m
A [EXIT]

R 1h20m R 1h20m R 1h20m
A [EXIT]