Panasonic HC-W850K - Manual (Page 215)

- 215 -
5
Touch [Remote Pan Tilt Cradle].
≥ The Remote Pan Tilt Cradle Mode selection screen is displayed.
≥ If you have touched an item other than [Remote Pan Tilt Cradle] or if the Remote Pan Tilt Cradle
is not recognized correctly, reconnect the USB cable.
≥ If you turn off and on this unit with the USB cable connected, this unit may operate in the previous
Remote Pan Tilt Cradle Mode.
6
Install the Remote Pan Tilt Cradle so that its home
position will face the front of the subject.
≥ The home position runs through the center of the power button.
≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any
other USB cables.)
≥ As shown in the illustration, connect the USB cable or DC cable so that it
will not be caught in objects such as the moving part of the Remote Pan
Tilt Cradle and other cables. If the cable is caught in the moving part of
the Remote Pan Tilt Cradle, it may cause the recording position to
change or cause a malfunction.
≥ Install the Remote Pan Tilt Cradle in a location that meets the following
requirements:
j A location out of the reach of children and pets
j A level location with no obstacles
j A location approximately 2 to 3 m away from subjects
≥ Do not use the Remote Pan Tilt Cradle when a Wide Conversion Lens (VW-W4907H: optional) is
attached to this unit.
≥ Before mounting this unit on the Remote Pan Tilt Cradle, insert the SD card and the battery.
≥ When this unit is mounted on the Remote Pan Tilt Cradle, make sure to hold the Remote Pan Tilt
Cradle to carry them. Carrying them by holding this unit may cause malfunction.
≥ Do not use the Remote Pan Tilt Cradle for surveillance purposes.
≥ Do not force the Remote Pan Tilt Cradle to stop moving during panning/tilting operation.
≥ The Remote Pan Tilt Cradle is not capable of supplying power to this unit.
≥ When the Remote Pan Tilt Cradle detects a problem, its status indicator flashes, and both this
unit and the Remote Pan Tilt Cradle turn off.
Home position