Different playback methods [playback mode, 2d/3d settings, Different playback methods – Panasonic DMC-ZS30K User Manual
Page 132: Playback mode, Application (view), Press [menu/set] in playback mode
Application (View)
Different playback methods
[Playback Mode]
VQT4T08
- 132 -
Recorded pictures can be played back in a variety of ways.
To change the Playback Mode, refer to and perform the following steps.
Press [MENU/SET] in playback mode
The menu selection screen is displayed.
Use cursor button to select [Playback Mode] menu and press
[MENU/SET]
•The menu type can also be selected by touch operations.
Press to select the Playback Mode and press [MENU/SET]
[2D/3D Settings]
Switches the output format between 2D and 3D pictures. (Only
available during HDMI output.)
[All]
Plays back all pictures.
[Slide Show]
Automatically plays back recorded pictures, one after another.
[Filtering Play]
Plays back the pictures after narrowing them down according to
various conditions.
[Calendar]
Displays the pictures according to the date on which they were
taken.
●
If the pictures displayed with [Slide Show] or [Filtering Play] are narrowed down,
selecting [All] will cancel the filtering.
●
The playback method automatically becomes [All] when the camera is turned on, or
when switching from [Rec] mode to [Playback Mode].
[2D/3D Settings]
•For switching [Playback Mode] (above)
The playback method for the 3D pictures can be switched. This menu is only displayed
during HDMI output. For the procedure for playing back a 3D still picture
.