Panasonic DMC-ZS30K - Manual (Page 251)

Wi-Fi
How to Use the [Wi-Fi Setup] Menu
VQT4T08
- 251 -
Configure the settings required for the Wi-Fi function.
[Wi-Fi Setup] cannot be changed when connected to Wi-Fi. (excluding [Network Address])
•For details on how to select the [Setup] menu settings, refer to (→54) .
Select [Wi-Fi Setup] in the [Wi-Fi] menu
Use cursor button to select item, and press [MENU/SET]
Item Description
[Smart Transfer] •For details (→238) .
[LUMIX CLUB]
Acquires or changes the
“LUMIX CLUB” login ID.
•For details (→243) .
[PC Connection]
You can set the workgroup.
You must connect to the same workgroup as the destination
computer when sending pictures to the computer.
(The default is set to “WORKGROUP”)
[Change Workgroup Name]:
Enter the workgroup of the connecting computer.
[Restore to Default]: Restore default settings.
•Refer to “Entering Text” (→114) for information on how to enter text.
•To use with a computer of the standard settings, you do not have
to change the workgroup.
[Device Name]
You can change the name of
this unit.
Press [DISP.] button
Enter the desired device name
•Refer to “Entering Text” (→114) for information on how to enter
text.
•Up to 32 characters can be entered for [A], [a], [1], and [&].
[External AV device]
Images can be sent to the
AV device of relatives and
acquaintances via “LUMIX
CLUB”.
•For details (→249) .
[NFC Operation]
Sets whether the NFC function
is activated or not.
[ON]
[OFF] ( The NFC function does not work even if smartphones are
placed to the side of the unit)