Others – Panasonic DMC-ZS30K User Manual
Page 288
Others
Q&A Troubleshooting
VQT4T08
- 288 -
About the Wi-Fi function (continued)
Your “LUMIX CLUB” login ID and password were deleted after sending the camera in to
be repaired.
●
The settings stored in the camera may be deleted depending on the type of repair.
→ Always make a copy of important settings.
There is an image that could not be transmitted.
●
Is the size of the image too large?
→ Divide the motion picture using [Video Divide]
.
→ Reduce the image size at [Size]
, and then send.
●
Capacity or number of images in the WEB service is full.
→ Login to “LUMIX CLUB”, and check the status of the destination on the WEB service link settings.
I have forgotten the password for the Wi-Fi.
→ Execute the [Reset Wi-Fi Settings] in the [Setup] menu.
→ However, all the information you have set on the [Wi-Fi Setup] menu, which includes the “LUMIX
CLUB” login settings, will be reset. (excluding [LUMIX CLUB])
Transmission of the image fails midway.
●
Is the size of the image too large?
→ Transmit after dividing the motion picture with [Video Divide]
.
→ Reduce the image size at [Size]
, and then send.
→ Image cannot be transmitted when the battery indicator is flashing red.
Motion picture cannot be transmitted.
●
File format of the motion picture that can be sent differs depending on the destination.
●
Is the size of the image too large?
→ Transmit after dividing the motion picture with [Video Divide]
.
I cannot send images to an AV device.
●
Sending may fail depending on the operational status of the AV device.
Also, sending may take a while.
I cannot connect using the NFC function.
●
The smartphone is not NFC compatible.
This function can be used with NFC compatible devices with Android (2.3.3 or above).
●
Is the NFC function on the smartphone turned off?
●
The [NFC Operation] on this unit is set to [OFF].
●
The camera has a hard time recognizing some smartphone models. If it is not recognized, slowly
shift the smartphone while it is beside the unit.