Connecting easily to a smartphone for, Remote control, Wi-fi – Panasonic DMC-ZS30K User Manual
Page 203
Wi-Fi
Easily connect to a smartphone (NFC)
VQT4T08
- 203 -
Connecting easily to a smartphone for remote control
If you use the NFC function, the operation for “Connecting to smartphone/tablet” becomes
quicker
Start “Image App” on the smartphone
Place your smartphone to the side of this unit
Place the NFC area of your smartphone over the part of this unit as shown in the
figure below.
•This function can be used even when the camera is turned off.
•Do not bump your smartphone strongly against this unit.
(The smartphone or this unit may get scratched)
•For information on how to use NFC compatible devices, please contact the device
manufacturer.
•If there is no immediate reaction, slightly move the position where the phone was
placed.
Place over this area
(within 5 mm (0.20 inch))
Press to select [Yes] and press [MENU/SET]
Place your smartphone over this area of the unit again
•When the connection is complete, live images captured by the camera will be
displayed on your smartphone.
•Connected smartphones are registered to this unit. From the next time and on,
you can connect by performing steps and .
●
You can register up to 20 smartphones. If the number of registered smartphones
exceeds 20, registrations will be deleted starting from the smartphone touched first.
●
Cannot connect while supplying power with the AC adaptor (supplied) connected.
(Pictures can be transferred.
)