Panasonic KXTG9150EX - Manual (Page 13)

Preparation
13
L
The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become
disconnected.
Location
L
For maximum distance and noise-free
operation, place your base unit:
– away from electrical appliances such as
TVs, radios, personal computers or
other phones.
– in a convenient, high and central
location.
Battery
installation/replacement
Important:
L
Use only the included rechargeable
batteries noted on page 6, 8.
L When replacing batteries, we recommend
using the Panasonic rechargeable
batteries noted on page 7, 8.
L Wipe the battery ends (S, T) with a dry
cloth.
L
When installing the batteries, avoid
touching the battery ends (S, T) or the
unit contacts.
1 Press the notch on the handset cover
firmly and slide it in the direction of the
arrow.
L When replacing batteries, remove the
old batteries positive (S) end first.
2 Insert the batteries negative (T) end
first. Close the handset cover.
Battery charge
Place the handset on the base unit for
about 7 hours before initial use.
When charging, “Charging” will be
displayed.
When the batteries are fully charged,
“Charge Completed” will be displayed.
L
While charging, the charge indicator on
the handset lights in amber. When the
batteries are fully charged, the charge
indicator lights in green.
Note:
L
It is normal for the handset to feel warm
during charging.
L
If you want to use the unit immediately,
charge the batteries for at least 15
minutes.
L
Clean the charge contacts of the handset
and base unit with a soft, dry cloth once a
month, otherwise the batteries may not
charge properly. Clean more often if the
unit is exposed to grease, dust, or high
humidity.
Charge
contact
TG9120_40_50EX(e).book Page 13 Monday, August 7, 2006 3:52 PM