Acer Altos G710 - Manual (Page 114)

4 BIOS setup 104
NMI Assert Enables or disables the PCI bus parity error
support. Enabled
Disabled
Reset
Disabled
Memory When this parameter is enabled, only the
the system’s healthy memory size is
displayed during the POST process. No
Yes
Memory
Mirror/Spare When this item is set to Mirror, only half of
the memory capacity will be detected by
the system OS.
When set to Sparing, a DIMM slot will be
reserved for standby in the event of
significant failures in a particular DIMM
and cannot be accessed by the system.
Disabled
Mirror
Sparing
Event Log
Area Displays the space available for event log
entries.
Event Logging Enables or disables the event logging
function of the system. Enabled
Disabled
Clear All Event
Logs When this item is set to Enabled, the event
log is cleared and this parameter is set to
Disabled for the next system bootup. Disabled
Enabled
View Event
Log Opens the system event log file for
viewing.
Event Control Interface
BIOS POST
Event
Logging BIOS checks the bad processors and
memory modules during the POST
process. When this parameter is enabled,
it will make a log of this operation. Enabled
Disabled
ECC Event
Logging ECC (Error Correcting Code) tests the
accuracy of data as it passes in and out of
memory. When this parameter is enabled,
single-bit and multi-bit memory errors will
be recorded in the event log. Enabled
Disabled
Parameter Description Option