Acer Altos G710 - Manual (Page 161)

151
(2) Secure the side handles to the server using the eight hex head
#6-32 screws (see page 147) from the rack mount kit.
6 Set the server aside.
7 Install the rack brackets to the rack by following the steps below:
(1) Align the rack brackets to the mounting rail until the six screw
holes become visible.
(2) Secure the rack brackets to the mounting rails using the six M4
x L8 metal screws and nuts (see page 147) from the rack
mount kit.
Tighten the screws but leave them loose enough to allow
length adjustment when installing the mounting rails to the
rack.
(3) Attach the other rack brackets to the remaining mounting rail.
8 Install the M6 cage nuts (see page 147) into the rail by following
the steps below:
(1) Insert the lower lip of the cage nut over the bottom of the
opening at the back of a rail.
(2) With your fingers, pinch the cage nut rack fastener and push
in until the top lip locks into position.