Acer Altos G710 User Manual
Page 160
Advertising
Appendix B: Acer Altos G710 rack installation guide
150
(2) Depress the release latch and slip the inner rail out.
(3) Do the same thing to the other mounting rail.
4
Attach the inner rails to the server by following the steps below:
(1) Align the inner rails to the top and bottom sides of the server.
(2) Secure the rails to the server using the ten #8-32 screws (see
page 147) from the rack mount kit.
Make sure the release latches are at the front of the system.
5
Attach the side handles to the server by following the steps below:
(1) Align the two side handles to the top and bottom sides of the
server.
Advertising