Acer Altos G710 - Manual (Page 34)

1 System tour 24
SAF-TE board layout
The SAF-TE board connects to the HDD cage’s backplane. It monitors
the backplane’s temperature and voltage condition and the status of
the SCSI hard drives.
SAF-TE configuration settings (SW1)
The SAF-TE board’s pre-assigned ID is SCSI ID 6. The table below shows
the board’s configuration settings.
No. Description
1 GEM 318p SAF-TE chipset
2 Configuration switch
Switch Description Switch Description
Switch 1 Off Switch 3 On
Switch 2 Off Switch 4 Off