Replacing the cd-rom drive – Acer Altos G710 User Manual
Page 63
Advertising
![background image](/manuals/45523/63/background.png)
53
6
Insert the drive carrier with the newly-installed FDD into the drive
bay.
7
Connect the IDE and FDD cables to the new drive.
8
Observe the post-installation instructions described on page 40.
Replacing the CD-ROM drive
Note: If you are installing a new drive in an empty drive bay, skip
steps 2 to 4.
1
Observe the ESD precautions and pre-installation procedures
described on page 39.
2
Disconnect the power and IDE cables from the old drive.
Advertising