Features summary – Acer Altos G710 User Manual
Page 13
3
Features summary
Listed below are the system’s key features:
Processor
•
Single or dual Intel
®
Xeon™ processor with 800 MHz front system
bus
•
Supports Intel
®
Hyper-Threading Technology
•
Supports Intel
®
Extended Memory 64-bit Technology
Memory subsystem
•
Eight 240-pin DIMM slots
•
Supports DDR2 400 Registered ECC memory modules
Warning! Functionality issues may be encountered if mixed
memory types are installed on the same mainboard. DIMM
modules of identical type, banking and stacking
technology, and manufacturer should be installed in the
Altos G710 system.
•
Maximum upgrade — 16 GB (when 2 GB of DDR2 400 Registered
ECC memory is available)
Caution! When using multiple memory modules it is
recommended that you AVOID using modules from different
manufacturers or that run at different speeds from each other.
•
2-way memory interleave
•
SDDC (Single Device Data Correction) for memory error detection
and correction of any number of bit failures in a single x4 memory
device
•
Memory mirroring and sparing technology
•
When the memory mirror parameter in the BIOS Setup utility is
enabled, only half of the memory capacity will be detected by
the system OS (Operating System).
•
When the memory spare parameter is enabled, a DIMM slot
will be reserved for standby in the event of significant failures
in a particular DIMM and cannot be accessed by the system.