Acer Altos G710 - Manual (Page 158)

Appendix B: Acer Altos G710 rack installation guide 148
Installing the system into the rack
Caution! To minimize the chances of injuries, make sure that two
or more people help in installing the server.
To install the system into a four-post rack
1 Remove the top panel from the server by following the steps
below:
(1) Remove the two screws that secure the top panel to the
chassis.
(2) Slide the top panel slightly backward, then detach it from the
chassis.
2 Remove the foot stands from the server by the following the steps
below:
(1) Lay the server on its side on a flat, stable surface (1).
(2) Remove the screws that hold the foot stands to the bottom of
the chassis (2). Keep these for later use.