ARRI ARRIFLEX 416 - Manual (Page 129)


1 1
Activate Format Markings
If the electronic format markings are not parallel to the fibre
screen format markings, readjust the CCD chip with the
rotation alignment screw, as shown in chapter 10.3.3
Alignment of the image position (X-, Y- and Rotation) and
focus.
Note: Only active frame lines can be positioned. If no
frame line is on (FORMAT OFF), no position line
can be reached with the cursor >. If Format 1 is
on, only – POSITION 1 can be reached with
the cursor >. Only if format 1 & 2 is selected,
all - POSITION lines can be accessed.
It is possible to have no format marking (OFF), format
marking number one (1), format marking number two (2)
or both format markings at the same time (1 & 2) on
display.
• Move the cursor > with the keys Ê and Ë to the line
– FORMAT. Pressing the key Í will switch from OFF to
1 to 2 to 1 & 2 and back to OFF, the key Ì will switch
in the opposite direction.
MENU FORMAT MARKING
- FORMAT 1&2
-> - POSITION 1 Ö
- POSITION 1 Ü
- POSITION 2 Ö
- POSITION 2 Ü
- WHITE LEVEL 2
- OUTSIDE LIGHT
- EXIT
Video-A
ss
is
t-Sy
stem