ARRI ARRIFLEX 416 - Manual (Page 131)


11 11
White Level – Setting the Brightness of the Format Markings
The brightness of the format markings can be set to black
(0), dark grey (1), and light grey (2) or white (3).
• Move the cursor > with the keys Ê and Ë to the line
– WHITE LEVEL. Pressing the key Í will switch the
settings from 0 to 1 to 2 to 3 and back to 0, pressing
the key Ì will step through the settings in the opposite
direction.
Outside – Darkening the Area outside of the Format Markings
This function is only available if one or both
format markings is activated.
The brightness of the area outside of one format marking
can be reduced electronically to emphasize the important
image area.
• Move the cursor > with the keys Ê and Ë to the line
– OUTSIDE. Pressing the key Í will switch from no
shading (VID), light shading (LIGHT), dark shading
(DARK) to black (BLACK) and back to VID. Pressing the
key Ì will step through the options in the opposite
direction.
Video-A
ss
is
t-Sy
stem
MENU FORMAT MARKING
- FORMAT 1&2
- POSITION 1 Ö
- POSITION 1 Ü
- POSITION 2 Ö
- POSITION 2 Ü
-> - WHITE LEVEL 2
- OUTSIDE LIGHT
- EXIT
MENU FORMAT MARKING
- FORMAT 1&2
- POSITION 1 Ö
- POSITION 1 Ü
- POSITION 2 Ö
- POSITION 2 Ü
- WHITE LEVEL 2
-> - OUTSIDE LIGHT
- EXIT